Advanced features

As part of a Compuspec solution, the V6 dialler is an incredibly powerful, feature rich tool for many complicated applications.

Patented technology

The V6 uses patented ZIPPY technology to never break the line during the placement of a call, a failure of so many other diallers.>/p>

Dialler of choice

The V6 is the 'swiss army knife' of diallers. With large amounts of programmable memory, it has performed in vast numbers of applications and has always stood out as the dialler of choice for those with more advanced requirements.

Popular look

While the V6 feature set can be offered in any of Compuspec's many case options, it can traditionally be found in Compuspec's renowned rectangular sloping case.

Features

  • Line Powered
  • Company Branding on Case
  • Capable of Being Posted
  • Electronic Serial Number
  • Auto Answer Capability
  • Wall or Desk Mountable
  • Remotely Programmable
  • Easy Installation
  • Tone and Pulse Recognition
  • Remote Diagnostics
  • Serial Port
  • Extra Large Memory Capacity
  • Accepts AC Power
  • Low Current Consumption

Services

  • Prefix Insertion
  • Exchange Services
  • Selective Call Blocking
  • Message Alerting
  • PBX Features
  • True Least Cost Routing
  • Digital Messging
  • Information Conduits
  • Fraud Prevention
  • Web Interaction
  • WAP Interaction
  • Call Detail Recording

Line powered

Requires no external power in most installations.

Company branding on case

Logos screen printed straight onto case in brilliant colour.

Capable of being posted

Case options fit through standard mail slot.

Electronic serial number

Each dialler electronically coded for tracking.

Auto answer capable

Able to answer a programming call to the V6.

Wall or desk mountable

Can sit on a desk or be wall mountable.

Programming options

Can be shipped pre-programmed.
On-site programming / re-configuration.
Remote programming using a touch tone phone or management platform.

Easy installation

No installation charges because installation is so easy, the end users can install the V6.

Tone & pulse recognition

Able to recognise and process both tone and pulse dialling modes.

Remote diagnostics

Management platform can be used remotely to highlight and correct call routing problems

Serial port

Suitable for communicating with other diallers, programming tools, and other Compuspec devices like service portals.

Extra large memory capacity

Extra memory for storing complete application, data to be passed on to the user, or collecting call statistics.

Accepts AC power

Where extra power is required, the V6 can accept an AC power adapter.

Low current consumption

Allows several units to be connected on separate extensions without affecting performance.

Free DMP-Lite available on request

Dimensions (approx)   25x55x85mm
Weight   50g
Temp. Range   -20°C - +60°C
Power   Line Powered
Idle Current   25 uA
Off-Hook Voltage   4.0VDC (min)
Line Requirement   Loop Start POTS
Line Connection   RJ11 or BT
Ringer Equivalence   <0.1b
Digit Recognition   Tone & Pulse
Dialling Delay (Typical)   0 ms
Access Types   1, 2 & 3 Stage
DTMF Detection Time   Var 10-990ms
DTMF Output   Var 50-990ms
Tone Recognition   50Hz - 3KHz
Surge Protection   260V Transorb